Long Distance 12V 24V 36V 6CH Wireless remote control switch lamps pump motor controller six-way switch Transmitter Receiver
This kind of DC12V-48V wide voltage two-way remote control switch, switch power supply, a professional switching power supply management chip, power supply voltage stability, a complete solution resistance capacity step-down and make the power supply voltage is not stable, lead to the entire switch unstable phenomenon.The remote control switch adopts 30 a relay, can load a high-power electrical appliances, learning microcontroller decoding, can learn more remote control, simple operation supporting flexible;Toggle switch is adopted to improve the switch output work way, dynamic, self-locking, interlocking (point) can be arbitrary choice easy to use, another new way of manual work.Apply to multiple areas a variety of purposes;Reserved for the output data bits welding plate, can receive through short different solder joint location choice of the remote control buttons, convenient customer supporting various remote control that oneself like, to avoid the old fixed single design keys you can match the embarrassment of the remote control.
Mainly used in garage door control, lighting control, electric door, remote control curtains, lifting equipment, motor control, water pump, projection screen elevator control and security industry and other fields, is easy to install, use the advantages of simple and safe and reliable.
1.Working Voltage: 12V –36V (12V 24V 36V all is ok )
2.Quiescent Current: less than 10mA
3.Working Current: 30mA (1 Relay)
4.Working Temperature: -40’C – +80’C
5. Receiving Sensitivity: more than -105dBm
6.Working Frequency: 315MHz / 433MHz Optional
7.Relay: 10A AC250V 10A AC125V 10A DC30V 10A DC28V
8.Max Load: 10A Relay, Resistive load less than 8A, Inductive load less than 3A
9.PCB Size: 87mm*92.6mm*16.4mm
10.Case Size: 90*115*40mm
2. The way of output
A. 1-6CH Momentary—–Press Transmitter Button “1”to learn
B. 1-6CH Latched—– Press Transmitter Button “2” to learn
C. 1-6CH Toggle– — Press Transmitter Button “3” to learn
D. 1-3CH Momentary, 4-6CH Toggle——Press Transmitter Button “4” to learn
E. 1-3CH Momentary, 4-6CH Latched—— Press Transmitter Button “5” to learn
F. 1-3CH Latched, 4-6CH Toggle——- Press Transmitter Button “6” to learn
Momentary————Press the Transmitter button 1, the receiver relay 1th is ON, release button 1; the receiver relay 1th is OFF, the same as 2/3/4/5/6 are independent.
Toggle—————Press transmitter button 1 for 1 time, the receiver relay 1th is ON, press button 1 again, the receiver relay 1th is OFF, the same 2/3/4/5/6 are independent.
Press transmitter button 1, the receiver relay 1th is ON, the relay 2/3/4/5/6 is OFF.
Press transmitter button 2, the receiver relay 2th is ON, the relay 1/3/4/5/6 is OFF.
Press transmitter button 3, the receiver relay 3th is ON, the relay 1/2/4/5/6 is OFF
Press transmitter button 4, the receiver relay 4th is ON, the relay 1/2/3/5/6 is OFF.
It also mean .Latched only can keep 1CH ON .and it will often have 1CH is ON.
3. Learning way and steps
1. Press the learning Button of the receiver and buzzer keep tweeting, indicate enter into the status of learning
2. Press the Relative button of the transmitter to learn Relative output way, indicate learning success as the buzzer tweet “Be Be Be” 3 sounds ,and then you press the transmitter Button you can hear the relay act sound. The receiver automatically exits learning state if you do nothing in 32 seconds.
4. Delete memory message (Must clear the code before you learn different button )
Keep pressing the learning Button of the receiver, the buzzer buzzer tweet and “Be Be Be Be “ (please do not wait for it Be for 6 sounds) then release the button , indicate success to delete the memory message.
Note: 433mhz and 315 mhz are available ,315mhz will be sent out if there is no demand on frequency
1 x Receiver(with cover)
1 x Transmitter(with battery)